1x9x18 High Cr ME15-1 Wear Plates
Technical parameters
| Composition(%) | C | Si | Mn | Cr | Mo | Ni | Cu | P&S | Hardness |
| High Cr | 2.4~2.7 | 0.3~0.8 | 0.6~0.9 | 16~19 | 1.0~1.4 | ≤1.0 | ≤1.0 | ≤0.06 | ≥HB601 (eqv.HRc57) |
Notes:
1. Radius .25will be required on all unspecified outside edges
2. Fit surfaces must be clean and gauged
3. Package: Packed in steel pallets.
4. Payment: 30% advanced payment by T/T prior to production; 70% payment before shipment.
Test Facilities
Test facilities include Spectrometer for chemical analysis, HRC table hardness tester, HBN table hardness tester, two portable hardness testers, impactor and universal material testing machine for inspection of mechanical properties, matrix microscope for metallographic examination, ultrasonic tester for ultrasonic inspection and magnetic particle tester for magnetic testing.
These facilities are used to ensure the consistent quality of products. We achieved the certificate of quality management system ISO 9001:2000. Our current capacity of finished castings is 4500 tons / year. We have a good credit of delivery of products in accordance with the contracts.
About Us
Wuxi Orient Anti-wear specialize in production of wear, heat and corrosion-resistant castings and the relevant grinding equipments. We were awarded the certificate of High New Technology Enterprise issued by Sci-tech Bureau, Jiangsu Province in 2004.
We are a Chinese specialized manufacturer of wear, heat and corrosion-resistant castings.
Our main products are ball mill liners, grinding media and wear parts for crushers.
Our products involve various kinds of materials, such as low Chrome alloy steel, middle Chrome alloy steel, high Chrome alloy steel, high chromium white iron, low chromium cast iron, Ni-hard cast iron, high Manganese steel and other heat and corrosion-resistant castings.
Our foundry has necessary production and heat treatment equipments, such as mid-frequency induction electrical furnaces, quenching and tempering furnaces, blast shot.
Our Service
1. Production of qualified wear and heat castings;
2. Design and installation of the boltless mill liners;
3. Consulting service of material selection of the mill liners under specific working condition to achieve
longer service life;
4. Consulting service of production & fineness improvement of grinding mills.
5.We can provide OEM/ODM for our clients.
F&Q
1. Q: Where is your factory located?
A: Our factory address is :Zhongyao, Xishan district, Wuxi, Jiangsu, P.R.China
2. Q: As the shipping period will take long time, how can you make sure the products won’t be broken?
A: Our products is film wrapped, to make sure the products can be delivered to our customer smoothly, we will use the steel wire to fix the products with the container.
3. Q: After we placing an order, will you arrange the installation of the products at present?
A: All the products will be tested well before delivered, so almost of them can be used directly, also our products are easy to be installed, if you customer needs our assistance, we will be pleased to arrange the installation, but all the cost will be be charged by you.
|
|
1x9x18 High Cr ME15-1 Wear Plates Hardness More Than HB601 For Milling Industry Images
|
